Innokin T20-S Prism Tank + 2 x Coils included ( 1 pre installed ) (Black)

Product Information

If you care about aesthetics and not looking sily - it's super super small as well, but without looking daft, i.e. if you're a big bloke - you're not going to look like you have a 'girly' vape, and likewise if you're a girl - it isn't something ultra big and heavy.

If you're after a simple device that delivers discreet vapour production, improved flavour and a compact design then you should consider the Innokin Endura T20S kit. Made from stainless steel and Pyrex glass, not only does the T20s Prism tank look the part, but it can also withstand all the bumps and scrapes of everyday life. Built to last, this is one tank you can rely on. Top-filling system With high VG liquid you should get more vapour production. This is an ok vapour – not massive clouds which I have got from the same liquid in lower resistance coils – but still good enough. I’m finding the taste from this in particular extremely impressive. Like its predecessor the prism tanks have always been well regarded for their taste and this is still the same for the T20S. Really superior taste to other tanks I have used. Would highly recommend for an existing vapour looking to make the jump from something like an Innokin T18E. Someone who just wants a bit more power or a few more options with their vape - especially those who really want to try 70/30VG liquids but who doesn't want to spend a fortune, or doesn't really want or need a big high powered mod - this little device is really very good.

I haven’t got this battery to run out yet – at 7.5 hours the light is still showing green (above half charge) so I hope that gives you an idea of the battery life. What I Like Unfortunately due to Royal Mail and Courier services, no collections take place and we are unable to deliver on bank holidays. Normal service resumes the following working day preceding any Bank Holidays Never use a battery that has been clearly damaged or is leaking. It should be discarded immediately in an appropriate way.

The Innokin Endura T20 S Prism vape tank that can be used for mouth to lung vaping and direct to lung vaping. Featuring a 2ml eliquid capacity, this practical vape tank has fixed dual airflow consisting of two small holes for increased cloud production. This tank is intended for vapers of all experiences. The airflow is almost perfect for MTL vaping. It’s a little bit airier than the T20 tank. I would really like to have an adjustable airflow in the future though.The Innokin Endura T20-S starter Kit includes everything apart from E-liquid to get you up and running. Plus some spares to help you maintain it. Unscrew the top cap (not the mouthpiece which I did accidentally a few times!) Grip the top cap part of the tank to unscrew. A tip I found with my friends T18 tank, is to always make sure the drip tip is fully pushed into the top cap. The bottom of the drip tip makes a seal with the centre of the coil. If the tip isn’t fully pushed in this can cause liquid to enter the centre of the coil which can result in spitting and leaks from the bottom pin of the tank.

I had some leaking problem, but it was because I wasn't assembling the tank together correctly. FYI: always screw the bottom ring on without the drip tip screwed in, THEN screw the drip tip in Also make sure that the coil is inserted correctly. Otherwise it may leak from the air holes. Estimated delivery time is between 3 and 5 days. This is not guaranteed. Please allow up to 10 days This is a definite MTL coil, quite restricted airflow – but it could do with a slightly tighter draw to satisfy a smoker. FOR BEGINNERS: There are many different affordable vape tanks and starter kits available that are designed with beginners in mind. We can provide you with basic yet highly-functional entry-level vape tanks that cater to either mouth to lung or direct to lung vaping styles. These will help you get to grips with the practicalities of vaping before you are ready to experiment and start creating your own bespoke vaping experience. Once you have grasped the basics, we’re always on hand to help you upgrade your vaping equipment and try something more powerful or a rebuildable like an RDA or RTA.

Bank Holidays

Proving to be a reliable and simple tank, the Prism T20-S was the perfect choice for this kit. It can hold 2ml of e-liquid and is compatible with any flavour you like. Thanks to the removable top section, you can refill it without having to dismantle the entire tank. If you’re looking for less vapour and inhale that’s similar to a cigarette, we recommend the 1.5 Ohm Prism S coil and either a 50/50 or high PG e-liquid. For slightly increased vapour production, the 0.8 Ohm coil and a 50/50 e-liquid will work best. I think as a starter or intermediate kit is where this excels. A smoker would find this very satisfying and it totally performs in the same tradition as its predecessors the T18 and T20 – being a great starter kit to advise someone to buy. The Innokin Endura T20S vape kit is a simple, user-friendly vape kit that's perfect for vapers of all experience levels. Previous Endura Models have lots of fans who use them to stop smoking and this is a wonderful update to the range. Optimised for use at low wattages, there's the option of a pre-installed 0.8 Ohm Prism-S coil as well as a spare 1.5 Ohm Prism T20 coil. We recommend high PG eliquids of 50% and above for best performance.

To change the coil you will need to empty the tank – so either decant the liquid into a suitable container or pour onto a tissue and discard.

Hope that helps in the meantime, anything else that comes to mind you want to clarify please ask away. For deliveries to the Scottish Highlands, Scottish Islands, Northern Ireland, Isle of Man, Scilly Isles, Isle of Wight & Jersey, please allow 2 to 5 days. Saturday and Sunday delivery is also not available in the areas listed above